Non-Fuel Products of Oil and Gas

PDF versionPDF version

Plastics, fertilizers, synthetic fibers, pharmaceuticals, detergents, and more


Oil and natural gas are complex mixtures of chemicals. Oil refineries and gas processing plants extract the organic compounds that make the best fuels for transportation, heating, and electricity generation: gasoline, jet fuel, diesel fuel, heating oil, and methane. Other chemicals derived from processing oil and natural gas are called petrochemicals and are used to make thousands of non-fuel products.

Getting from Oil and Gas to Petrochemicals

Petrochemicals can be produced by refining oil or processing natural gas; petrochemical plants are typically built to use either oil- or gas-derived materials (or both), depending on the availability and price of each. Globally, most petrochemicals are derived from oil, but in the U.S., most petrochemicals are produced from natural gas, due largely to high domestic natural gas production.1

The most important raw materials for petrochemicals produced from natural gas are ethane and propane. After methane (which is mostly used for fuel), ethane and propane are the most common organic compounds in natural gas. They are removed during natural gas processing, so the more gas produced, the more ethane and propane are available to make petrochemicals.2 Ethane and propane molecules are larger and heavier than methane, so they require less pressurization or cooling to turn them into liquids, earning them the name “natural gas liquids.” During gas processing, other natural gas liquids are also derived in smaller amounts and are processed and used for many purposes, while methane itself is used as a source of hydrogen to make fertilizer and other products (see below). Naphtha, a liquid mixture distilled from crude oil at refineries, is also used as feedstock for various petrochemicals.3

Ethane, propane, or naphtha can be heated to very high temperatures (up to around 850oC, or 1562oF) to break apart molecules (“cracking”)4 or selectively pluck hydrogen atoms off the molecules (“dehydrogenation”) to form new chemicals such as ethylene and propylene.

Ethylene and propylene are the two dominant petrochemicals: in 2016, the U.S. produced over 26 million tons of ethylene and over 14 million tons of propylene.5 Ethylene is primarily converted into polyethylene (the most common plastic, used in thousands of applications), but is also used to make other plastics such as polyvinylchloride (PVC, for pipes and home siding) and polystyrene (used as a general plastic and as Styrofoam for insulation and packaging). Propylene is mostly converted into polypropylene for fibers, carpets, and hard plastic; some propylene produced during oil refining is used to make compounds that are added to gasoline to improve performance.6 Both ethylene and propylene are used to make many other chemicals and materials with many uses, including specialty plastics, detergents, solvents, lubricants, pharmaceuticals, synthetic rubbers, and more.

From Petrochemicals to Consumer Products

Most plastics, synthetic fibers (such as polyester and nylon), and resins (such as epoxy) are produced from petrochemicals. These products are major components of vehicles, home and office buildings, electronics, clothing, packaging, and more. While these are some of the best-known uses of petrochemicals, other major uses of petrochemicals and other non-fuel products of oil and gas include:

  • Fertilizers – hydrogen derived from methane (the main ingredient in natural gas) is combined at high temperatures with nitrogen extracted from air to make almost all of the ammonia in the world (a small amount of ammonia is produced using other sources of hydrogen such as propane, naphtha, or gasified coal). About 88% of U.S. ammonia consumption is used as the nitrogen source for fertilizer. Other important uses of ammonia include household and industrial cleaning products, refrigerants, and in the manufacturing of plastics, dyes and explosives.7
  • Pharmaceuticals – almost all pharmaceuticals are made from chemical feedstocks manufactured from petrochemicals and their derivatives.8
  • Many detergents and other cleaning products are made from petrochemicals.9 Similar cleaning products made from plant oils are now widely available, although these products are often also produced using substances made from petrochemicals.
  • Road asphalt consists of roughly 95% crushed stone, sand, and gravel; the remaining 5% is a thick, dark oil known as asphalt or bitumen, which occurs naturally in some rocks but is also produced by oil refining.

Ammonium nitrate fertilizer being applied to winter wheat. Almost all ammonia used for fertilizer is derived from natural gas.

Ammonium nitrate fertilizer being applied to winter wheat. Almost all ammonia used for fertilizer is derived from natural gas. Image credit: Michael Trolove, Wikimedia Commons.17

Fertilizer: Ammonia from Natural Gas

Ammonia, a compound of hydrogen and nitrogen, is industrially produced on a vast scale. The U.S. produced over 10 million tons of ammonia in 2017,7 almost entirely using hydrogen derived from natural gas. Roughly 88% of this ammonia is used to provide nitrogen for fertilizer, making up almost 60% of all fertilizer used in the United States.10 With growing domestic natural gas production, low natural gas prices, and new fertilizer plants coming online,11 U.S. ammonia production capacity is expected to grow by 25% from 2018 to 2022. Over this same period, global ammonia production (150 million tons in 2017) is expected to grow by 8%.7

Medicine: Plastics and Pharmaceuticals

Plastics are so widely used that it is easy to forget how varied they are – the most common plastic, polyethylene, comes in 10,000 different types for different uses.12 In medicine, plastics serve a wide variety of purposes: keeping medical equipment sterile; providing inexpensive disposable syringes, tubing, and single-use supplies to reduce the risk of infection; and forming implants and artificial joints, as well as many advanced materials, including natural-synthetic hybrids that can be used inside the body with lower risk of rejection.

One of the oldest uses of petrochemicals is petroleum jelly, a soft solid that often naturally separates from crude oil. Petroleum jelly was first marketed over 150 years ago and is still widely used for skin care and cosmetics.19

Petrochemicals provide the chemical building blocks for most medicinal drugs: nearly 99% of pharmaceutical feedstocks and reagents are derived in some way from petrochemicals.8 For example, aspirin has been manufactured from benzene, produced in petroleum refining, since the late 19th century.20

Medications and the bottles that house them are almost all made using petrochemical building blocks.

Medications and the bottles that house them are almost all made using petrochemical building blocks. Image credit: Airman Valerie Monroy, U.S. Air Force.18

Sulfur and Helium

Sulfur is common in both oil and natural gas. If it is not removed, it can corrode steel transportation equipment and pipelines, and produce acid rain when released as sulfur dioxide during combustion. Removing sulfur from these fuels reduces economic and environmental damage while also producing a valuable industrial material: in 2017, the United States produced over 9 million tons of sulfur valued at $585 million; the vast majority of this came from oil refining and gas processing.21 Sulfur is mostly used to make sulfuric acid for a wide range of industrial processes, notably in the production of fertilizer, which accounts for half of global sulfur consumption.22

Helium is an important industrial gas with a wide variety of applications in aircraft, aerospace, electronics, and advanced metalworking. Liquid helium is the coldest cryogenic liquid available: aside from advanced research, a major application of liquid helium is to cool magnetic resonance imaging (MRI) scanners. Helium is sourced entirely from natural gas at gas processing plants. The U.S. is the largest helium producer in the world: in 2017, the U.S. accounted for 57% of global helium production. Qatar produces most of the rest (28% of global production), with a handful of other countries producing small quantities.23

Magnetic resonance imaging (MRI) scanners use specialized magnets that require extremely low temperatures to operate. These low temperatures are achieved using liquid helium.

Magnetic resonance imaging (MRI) scanners use specialized magnets that require extremely low temperatures to operate. These low temperatures are achieved using liquid helium, which is the only currently available source of ultra-low cryogenic temperatures. Helium is sourced entirely from natural gas. Image credit: Jan Ainali, Wikimedia Commons.24

Petrochemicals and the Environment

When oil, gas, and the environment are discussed together, the focus is often on the ways in which oil and gas can damage environmental or human health, and steps that can be taken to prevent or reduce these impacts. Petrochemicals are an interesting case because they have both positive and negative impacts on the environment. The negative impacts are significant and should not be understated, but they are also generally well-known: the accumulation of plastic waste,25 the harm that plastics and their breakdown products can cause when ingested by animals,26 and the damage to aquatic ecosystems caused by fertilizer runoff (caused by both natural and petrochemical fertilizers).27 The environmentally beneficial uses of petrochemicals are less commonly discussed but are an important part of any discussion of overall environmental impacts. Some of these environmentally beneficial uses include:

  • Oil absorbents used to clean up oil spills.28 Natural biological materials (e.g., feathers or straw) can absorb 3-15 times their weight in oil, while minerals (e.g., sand and vermiculite clay) can absorb 4-20 times their weight in oil. These natural materials are inexpensive but they can often sink in water, making them less effective for oil spills at sea. Synthetic oil absorbents made from plastic or nylon can absorb up to 70 times their weight in oil while staying afloat, making them effective for oil spill cleanup in water.
  • Federal regulations require construction or demolition sites to have barriers that prevent stormwater runoff from carrying sediment and waste into sewers, rivers, or streams.29 These barriers are often made of plastics or synthetic fibers, which are weather-resistant and impermeable.
  • Some petrochemical-derived products can be used to remove carbon dioxide from the combustion gases of power plants, thus reducing the greenhouse gas emissions of energy production. In 2017, the Petra Nova project near Houston, Texas, began operations as the largest such project in the world. Attached to an existing coal-fired power plant, the system removes carbon dioxide from the combustion gases by reacting it with chemicals called amines (derived from ammonia, which is produced from natural gas).31 The Petra Nova project is designed to capture 1.6 million tons of carbon dioxide per year.32

Plastic fencing to control soil erosion and stormwater runoff at a construction site.

Plastic fencing to control soil erosion and stormwater runoff at a construction site. Image Credit: U.S. Environmental Protection Agency.30

Plastic Disposal and Recycling

Most plastic food and beverage containers, plastic bags, and other packaging can be recycled.33,34 Some plastics can be reprocessed to make the same product they were originally used for (e.g., plastic bottles). Plastic bottles can also be turned into polyester fiber used for fleece jackets, insulation, and carpeting. Plastic bags and film can be recycled into plastic lumber, used to make outdoor furniture, decks, and fencing.35

Despite the many potential reuse options for plastics, only about 9.5% of plastic material generated in the U.S. was recycled in 2014. Over 75% went into landfills, while 15% went into trash-to-energy plants that burn waste to generate electricity.36 A small but significant proportion of used plastic is not properly disposed of and ends up in the surface or marine environment, where it takes hundreds of years to decompose and can harm wildlife.

More Resources

Penn State Extension – Gas, Cracker, Polymer, Pellets – Ethane’s Journey to Plastics. Shale Gas Webinar, September 21, 2017.
U.S. Geological Survey – Mineral Commodity Summaries. (Information on commodities derived from oil and gas and related operations, including sulfur, helium, ammonia, and iodine).
Hess, J. et al. (2011). Petroleum and Health Care: Evaluating and Managing Health Care’s Vulnerability to Petroleum Supply Shifts. Am. J. Pub. Health, 101(9), 1568-1579.


1 U.S. Energy Information Administration – How much oil is used to make plastic?
2 U.S. Energy Information Administration (2015). Growing U.S. HGL production spurs petrochemical industry investment. Today in Energy, January 29, 2015.
3 U.S. Energy Information Administration – U.S. Refinery Net Production of Naphtha for Petrochemical Feedstock Use.
4 Plotkin, J.S. (2016). Beyond the Ethylene Steam Cracker. American Chemical Society.
5 Mitsubishi Chemical Techno-Research, LPG Conference, March 7, 2017.
6 Plotkin, J.S. (2015). The Propylene Gap: How Can It Be Filled? American Chemical Society.
7 U.S. Geological Survey (2018). Nitrogen (Fixed) – Ammonia. Mineral Commodity Summaries, 2018.
8 Hess, J. et al. (2011). Petroleum and Health Care: Evaluating and Managing Health Care’s Vulnerability to Petroleum Supply Shifts. Am. J. Pub. Health, 101(9), 1568-1579.
9 American Cleaning Institute – Soaps & Detergents: Chemistry (Surfactants).
10 U.S. Department of Agriculture, Economic Research Service – Fertilizer Use and Price, 2018.
11 U.S. Energy Information Administration (2017). First world-scale, greenfield nitrogenous fertilizer plant opened in over 25 years. Natural Gas Weekly Update, May 4, 2017.
12 Penn State Extension – Gas, Cracker, Polymer, Pellets – Ethane’s Journey to Plastics. Shale Gas Webinar, September 21, 2017.
13 U.S Energy Information Administration – Natural Gas Gross Withdrawals and Production.
14 U.S. Energy Information Administration (2017). Appalachian natural gas processing capacity key to increasing natural gas, NGPL production. Today in Energy, August 29, 2017.
15 U.S. Energy Information Administration (2016). Short-term Outlook for Hydrocarbon Gas Liquids.
16 Shell – Pennsylvania Chemicals Project: Frequently Asked Questions.
17 File:Top dressing winter wheat – – 1740985. Wikimedia Commons, Author: Michael Trolove. Reproduced according to a CC BY-SA 2.0 license.
18 Photo by Airman Valerie Monroy, U.S. Air Force.
19 Vaseline – What is Petroleum Jelly, and What is it Used For?
20 Connelly, D. (2014). A history of aspirin. Clinical Pharmacist, September 2014, 6(7), online.
21 U.S. Geological Survey (2018). Sulfur. Mineral Commodity Summaries, 2018.
22 Apodaca, L.E. (2017). Sulfur. 2015 Minerals Yearbook, U.S. Geological Survey.
23 U.S. Geological Survey (2018). Helium. Mineral Commodity Summaries, 2018.
24 File:MRI-Philips.JPG. Wikimedia Commons user Jan Ainali. Reproduced according to a CC BY 3.0 license.
25 Barnes, D.K.A. et al. (2009). Accumulation and fragmentation of plastic debris in global environments. Phil. Trans. R. Soc. B, 364,1985-1998.
26 Ryan, P.G. (1990). The effects of ingested plastic and other marine debris on seabirds. NOAA Technical Memo NOAA-TM-NMFS-SWFSC-154.
27 U.S. Environmental Protection Agency – Nutrient Pollution: The Sources and Solutions: Agriculture.
28 U.S. Environmental Protection Agency – Emergency Response: Sorbents. EPA Archive, January 19, 2017.
29 U.S. Environmental Protection Agency – National Pollutant Discharge Elimination System.
30 File:Silt fence EPA. Obtained from Wikimedia Commons. Public Domain.
31 Rochelle, G.T. (2009). Amine Scrubbing for CO2 capture. Science, 325, 1652-1654.
32Petra Nova, World’s Largest Post-Combustion Carbon Capture Project, Begins Commerical Operation.” U.S. Department of Energy, Office of Fossil Energy, January 11, 2017.
33 Container Recycling Institute – Plastic Facts and Statistics.
34 Plastic Film Recycling – Learn What’s Recyclable.
35 American Chemistry Council – What Plastics Can Become.
36 U.S. Environmental Protection Agency (2016). Advancing Sustainable Materials Management: 2014 Fact Sheet.

Petroleum and the Environment

Download a full PDF of Petroleum and the Environment (free) or purchase a printed version ($19.99).

Other parts in this series:
1. Petroleum and the Environment: an Introduction
2. Water in the Oil and Gas Industry
3. Induced Seismicity from Oil and Gas Operations
4. Water Sources for Hydraulic Fracturing
5. Using Produced Water
6. Groundwater Protection in Oil and Gas Production
7. Abandoned Wells
8. What Determines the Location of a Well?
9. Land Use in the Oil and Gas Industry
10. The Pinedale Gas Field, Wyoming
11. Heavy Oil
12. Oil and Gas in the U.S. Arctic
13. Offshore Oil and Gas
14. Spills in Oil and Natural Gas Fields
15. Transportation of Oil, Gas, and Refined Products
16. Oil Refining and Gas Processing
17. Non-Fuel Products of Oil and Gas
18. Air Quality Impacts of Oil and Gas
19. Methane Emissions in the Oil and Gas Industry
20. Mitigating and Regulating Methane Emissions
21. Regulation of Oil and Gas Operations
22. Health and Safety in Oil and Gas Extraction
23. Subsurface Data in the Oil and Gas Industry
24. Geoscientists in Petroleum and the Environment
Glossary of Terms

Global Production of Major Petrochemicals (2016)

Ethylene (146 million metric tons):5

  • Middle East: 19%
  • United States: 18%
  • China: 15%

Propylene (99 million metric tons):5

  • China: 26%
  • United States: 14%
  • Western Europe: 13%

Ammonia (144 million metric tons of nitrogen):7

  • China: 32%
  • Russia: 9%
  • India: 8%
  • United States: 7%

Appalachia’s New Role in U.S. Manufacturing

Since 2010, the Appalachian region has seen enormous growth in natural gas production from the Marcellus and Utica shales: by 2017, they provided almost 25% of all U.S. gas production.13 This gas is especially rich in ethane, propane, and other natural gas liquids,14 providing vast resources for petrochemical production. By mid-2017, almost 23 billion cubic feet of natural gas was processed in Appalachia every day, providing 600,000 barrels per day of ethane and other natural gas liquids.14 These natural gas liquids are mostly transported by pipelines to cracking plants on the Gulf Coast or exported to Canada.15 However, the growth in natural gas liquid production, especially since 2013, has prompted plans to build new ethane crackers in Appalachia.12 The first of these is likely to be a Shell project in Beaver County, Pennsylvania, which is due to begin operations in the early 2020s.16 Local production of plastics and other petrochemicals is expected to support the local manufacturing industry.